Scientists improve reliability of residual stress determination
October 13, 2026

Researchers from the Laboratory of Hierarchically Structured Materials at the Engineering Center of Skoltech (part of the VEB.RF group) have developed an approach based on rational experimental-computational correlation (RECC) that enhances the stability of residual stress estimation against measurement noise. For example, with a significant experimental error of up to 10 percent, the error in stress determination was reduced from 40 to 6 MPa. The results of the study are published in the scientific journal Measurement.

subscription
subscription
Recovery of residual stresses by the contour method with increasing levels of simulated measurement noise from 5 to 30%. Color maps on the left show stress distribution; graphs on the right show their profiles: the reference direct solution and the reconstruction result by the contour method. As noise increases, the reconstruction deviates more strongly from the reference solution, and at 20–30% pronounced oscillations and areas of non-physical values appear. Source: I. Zorin et al. / Measurement.

Residual stress arises in materials after manufacturing, processing, or loading of a part and can significantly affect its durability, fatigue resistance, and crack propagation. They are especially important to consider in stress concentration areas, for example, near fastener holes in aviation and transport structures. One way to determine the distribution of such stresses through the thickness of a material is the so-called “contour method.” A specimen is cut, the displacements caused by stress release on the cut surface are measured, and then the original residual stress field is reconstructed from these data using numerical modeling.

The distinctive feature of the contour method is that it solves an inverse problem: stresses are calculated from measured surface displacements. Therefore, even relatively small errors in the initial data can be amplified during reconstruction. The result is influenced by both statistical measurement noise and data processing features, interpolation, and the state of the surface after cutting. In this work, the researchers quantitatively assessed how random noise in measured displacements affects the determination of stress fields.

“Traditionally, the accuracy of experimental data in the contour method is accepted as sufficient based on comparison with other approaches (for example, diffraction-based), but the stability and reliability of the solution are rarely assessed quantitatively. We created an experimental-computational scheme that allows us to quantitatively trace how the error in displacement measurement affects the determination of stress fields. For the representative noise level of 10% that we selected, the reconstruction error was about 40 megapascals for aluminum alloy 2024-T4. The proposed approach (Sur-RECC) describes the displacement profile with a smooth analytical function — a Gaussian curve with a quadratic background. This allows suppressing high-frequency deviations and, in the case considered, reduces the effective error to approximately 5–6 MPa,” explains the first author of the article, Igor Zorin, a PhD student in the Engineering Systems program.

subscription
Effect of measurement noise on the accuracy of residual stress recovery by the contour method and using the proposed Sur-RECC approach. The graph shows normalized recovery error (NRMSE): the use of Sur-RECC substantially reduces the sensitivity of the result to noise. Source: I. Zorin et al. / Measurement.

The approach was tested on specimens made of high-strength 2024-T4 aluminum alloy. Double-sided dimpling of the specimens created a characteristic residual stress field, which was used as a model problem. After that, the specimens were cut on a wire electrical discharge machine using special clamping tooling that restricted their movement during cutting. The deformation of the cut surface was measured by confocal laser profilometry. X-ray diffraction and focused-ion-beam digital image correlation were used for independent verification of the obtained residual stress field.

In parallel, the scientists reproduced the process of deformation, unloading, and subsequent cutting of the specimen using the finite element method. The field obtained by direct modeling was used as a reference for a numerical experiment: controlled random noise was sequentially added to the initial data, and the extent to which it distorted the result of the contour method was assessed. This approach made it possible to separate the influence of statistical noise itself from other sources of uncertainty.

“Sur-RECC effectively regularizes the solution of the inverse problem: it preserves the smooth component of deformation, which is essential for determining the macroscopic stress field, and suppresses high-frequency deviations. At the same time, we don’t claim that all local fluctuations are related to measurement error — some of them may be related to material, cutting, or data processing features. The article compares direct modeling and inverse problem approaches for determining residual stresses by specimen sectioning methods, which are extremely important for assessing the distribution of internal stresses through thickness. The proposed data processing makes these approaches more reliable and resistant to noise,” noted co-author of the article, Professor Alexander Korsunsky,  head of the Skoltech Engineering Center’s Laboratory of Hierarchically Structured Materials.

The study was carried out by Skoltech researchers with the participation of specialists from the Moscow Aviation Institute and the Central Institute of Aviation Motors. The work was supported by the Ministry of Science and Higher Education of the Russian Federation within the framework of a major scientific project.